VOLUMETRIC DRY FEEDER VG100

Volumetric feeder with dry powder mixer

The volumetric dry powder feeder VG100 is easily able to dose all kind of powdery, granulated or fibrous products, always assuring an accurate and constant dosing, both for small and middle flow rate.

The main features of this model are dimensions reduced to the minimum and the presence of a mixer. All parts in contact with the powder are completed manufactured SS 304L. 

METERING SCREW: it allows complete feeder emptying, thanks to its positioning near the bottom. You can rely on an extensive range of squared profiled screws, that differ for different diameter and pitch (see the table below for the technical flow rate). 

MIXER: it homogenises the products and prevent formation of bridges, characteristic of powder dosing. 

HOPPER: standard model have 4 inclined walls that make easier the product sliding; 30, 50 and 100 litre capacities are available (see drawing below). 

OPTIONS: 

- MANUAL SPEED VARIATOR: it enables a real time variation of flow rate in a range of 1 to 5 proportional to maximal flow; 

- POWEDER LEVEL SENSOR;

- HEATING DOSING SCREW: a 30W@ 24Vdc resistance and a thermostat are placed over the exit pipe to avoid product packing. 

 

 

 

03

04

05

13

14

FLOW min

VG100/V

0,7

3

12

19

50

FLOW max

3,7

17

65

100

26

FLOW fix

VG100/F

2,8

13

50

75

205